CDI grommet
Flexible rubber sleeve that holds the CDI in place and keeps out water and dust.
- Standard
- MB100
Fits CD 70, CD 100, CG 125
Ask about this part
CDI unit for CD 70, CD 100 and CG 125
Sealed ignition unit in a molded housing, made in every common pin layout so it plugs straight in without rewiring.
Types
- MB100
- 4 pin
- 5 pin
- 6 pin
Fits
CD 70, CD 100, CG 125
- Reply the same day
- Dealer and bulk prices
- Made in Karachi
About this part
The CDI (capacitor discharge ignition) unit decides when the spark plug fires. When it fails, the bike will not start or will cut out on the road, so it is one of the fastest-moving parts in any spare-parts shop.
We make our CDI units in every common pin layout with the original plug shape, so a mechanic can swap the old unit out in a minute without cutting or rejoining wires. The electronics are sealed inside a molded housing to keep out water, dust and vibration.
Which type do I need?
Count the pins on the plug of the old unit and match it below. Still not sure? Send us a photo.
| Type | Plug | Fits |
|---|---|---|
| 4 pin | One plug, 4 pins | CD 70 |
| 5 pin | One plug, 5 pins | CD 70, CD 100 |
| 6 pin | Two plugs: 4 pin and 2 pin | CG 125 |
| MB100 | MB100 pattern plug | MB100 type bikes |
Signs a CDI unit has failed
- The engine turns over but there is no spark at the plug.
- The bike starts cold but cuts out once the engine is hot.
- Misfiring or jerking at higher speed even with a new spark plug.
- Hard starting that comes and goes without a clear reason.
How we check it
- Every batch is fitted and started on the bike it is made for before it ships.
- Plugs are checked against the original so they click in fully and do not work loose.
- Housings are checked for cracks and full sealing, so water cannot reach the board.
Guide · 5 min readHow to choose the right CDI unit for a CD 70, CD 100 or CG 125Questions buyers ask
Which CDI fits my bike?
Count the pins on the plug of your old CDI and match it to the table above. Send a photo of the old part on WhatsApp and we will tell you which type you need.
Do you sell to spare-parts shops or only to assemblers?
Both. We supply spare-parts dealers in cartons and motorcycle assemblers in bulk. Tell us the types and quantities you need and we will send a price.
Can you make a CDI housing with our own brand on it?
Yes. Because we make our own molds, we can mold your brand name or logo into the housing for larger orders.
How fast can you deliver?
Common types are usually in stock and ship across Pakistan. Ask on WhatsApp for current stock and delivery time to your city.
More ignition and charging parts
See all →
CDI charger
Stator charging coil with copper windings that powers the CDI and charges the battery. Fitted lead and connector.
- 70cc
- 125cc
Fits CD 70, CG 125
Ask about this part
Rectifier
Finned aluminium rectifier that turns coil output into clean DC for the battery and stops overcharging. Colour-coded leads with bullet connectors.
- 70cc
- 125cc
Fits CD 70, CG 125
Ask about this part
Winker relay
Flasher relay that sets the blink rate of the indicators. Plug-in fit, no cutting wires.
- CD 70
- CG 125
Fits CD 70, CG 125
Ask about this part